Category: 70-412 Dumps

QUESTION 331
Hotspot Question
Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2.
Server1 and 5erver2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the name appl.contoso.com.
The NLB cluster has the port rules configured as shown in the exhibit. (Click the Exhibit button.)
 
To answer, complete each statement according to the information presented in the exhibit.
Each correct selection is worth one point.
 
Answer:
 

QUESTION 332
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
You install the IP Address Management (IPAM) Server feature on a server named Server1 and select Manual as the provisioning method.
The IPAM database is located on a server named SQL1.
You need to configure IPAM to use Group Policy Based provisioning.
What command should you run first?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 333
Your network contains an Active Directory domain named contoso.com. The domain contains an IP Address Management (IPAM) server that uses a Windows Internal Database.
You install a Microsoft SQL Server 2012 instance on a new server.
You need to migrate the IPAM database to the SQL Server instance.
Which cmdlet should you run?

A.    Disable-IpamCapability
B.    Set-IpamConfiguration
C.    Update-IpamServer
D.    Move-IpamDatabase

Answer: D

QUESTION 334
Your network contains an Active Directory domain named contoso.com. The domain contains a certification authority (CA).
You suspect that a certificate issued to a Web server is compromised.
You need to minimize the likelihood that users will trust the compromised certificate.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    Stop the Certificate Propagation service.
B.    Modify the validity period of the Web Server certificate template.
C.    Run certutil and specify the -revoke parameter.
D.    Run certutil and specify the -deny parameter.
E.    Publish the certificate revocation list (CRL).

Answer: CE
Explanation:
First revoke the certificate, then publish the CRL.

QUESTION 335
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 is an enterprise root certification authority (CA) for contoso.com.
You need to ensure that the members of a group named Group1 can request code signing
certificates. The certificates must be issued automatically to the members.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    From Certificate Templates, modify the certificate template.
B.    From Certification Authority, add a certificate template to be issued.
C.    From Certificate Authority, modify the CA properties.
D.    From Certificate Templates, duplicate a certificate template.
E.    From Certificate Authority, stop and start the Active Directory Certificate Services (AD CS) service.

Answer: AB
Explanation:
First modify the certificate template in Certificate Templates, then add it in Certification Authority.

QUESTION 336
Hotspot Question
Your network contains an Active Directory forest.
You implement Dynamic Access Control in the forest.
You have the claim types shown in the Claim Types exhibit. (Click the Exhibit button.)
 
The properties of a user named User1 are configured as shown in the User1 exhibit. (Click the Exhibit button.)
 
The output of Whoa mi /claims for a user named User2 is shown in the Whoa mi exhibit.
(Click the Exhibit button.)
 
Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.
 
Answer:
 

QUESTION 337
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
You are creating a central access rule named TestFinance that will be used to grant members of the Authenticated users group access to a folder stored on a Microsoft SharePoint Server 2013 server.
You need to ensure that the permissions are granted when the rule is published. What should you do?

A.    Set the Permissions to Use the following permissions as proposed permissions.
B.    Set the Permissions to Use following permissions as current permissions.
C.    Add a Resource condition to the current permissions entry for the Authenticated Users principal.
D.    Add a User condition to the current permissions entry for the Authenticated Users principal.

Answer: B

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html

QUESTION 321
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012.
Server1 is the enterprise root certification authority (CA) for contoso.com.
You need to enable CA role separation on Server1.
Which tool should you use?

A.    The Certutil command
B.    The Authorization Manager console
C.    The Certsrv command
D.    The Certificates snap-in

Answer: A

QUESTION 322
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server3. The network contains a standalone server named Server2.
All servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
 
Server3 hosts an application named Appl. App1 is accessible internally by using the URL https://appl.contoso.com. App1 only supports Integrated Windows authentication.
You need to ensure that all users from the Internet are pre-authenticated before they can access Appl.
What should you do?
To answer, drag the appropriate servers to the correct actions. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
 
Answer:
 

QUESTION 323
You have five servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.
 
Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles.
Dynamic quorum management is disabled.
You plan to perform hardware maintenance on Server3.
You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Server3, the cluster resource will remain available in Site1.
What should you do?

A.    Add a file share witness in Site1.
B.    Enable DrainOnShutdown on Cluster1.
C.    Remove the node vote for Server4 and Servers.
D.    Remove the node vote for Server3.

Answer: C

QUESTION 324
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has access to disks that connect to a RAID controller, iSCSI disks, and disks connected to a SCSI controller.
You plan to use a tiered storage space on Server1.
You need to identify which storage controller and volume type you must use for the tiered storage space.
Which storage components should you use?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 325
Drag and Drop Question
Your network contains an Active Directory domain named adatum.com. The domain contains three servers. The servers are configured as shown in the following table.
 
Server1 is configured as shown in the exhibit. (Click the Exhibit button.)
 
Template1 contains custom cryptography settings that are required by the corporate security team.
On Server2, an administrator successfully installs a certificate based on Template1.
The administrator reports that Template1 is not listed in the Certificate Enrollment wizard on Server3, even after selecting the Show all templates check box.
You need to ensure that you can install a server authentication certificate on Server3. The certificate must comply with the cryptography requirements.
Which three actions should you perform in sequence?
To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
 
Answer:
 

QUESTION 326
Your network contains an Active Directory domain named contoso.com.
You deploy a server named Server1 that runs Windows Server 2012 R2.
A local administrator installs the Active Directory Rights Management Services server role on Server1.
You need to ensure that AD RMS clients can discover the AD RMS cluster automatically.
What should you do?

A.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then configure the proxy settings.
B.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Schema Admins group, and then register the Service Connection Point (SCP).
C.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then register the Service Connection Point (SCP).
D.    Run the Active Directory Rights Management Services console by using an account that is a member
of the Enterprise Admins group, and then configure the proxy settings.

Answer: C

QUESTION 327
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured to support key archival and recovery.
You create a new Active Directory group named Group1.
You need to ensure that the members of Group1 can request a Key Recovery Agent certificate. The solution must minimize the permissions assigned to Group1.
Which two permissions should you assign to Group1? (Each correct answer presents part of the solution. Choose two.)

A.    Read
B.    Auto enroll
C.    Write
D.    Enroll
E.    Full control

Answer: AD
Explanation:
* In Template, type a new template display name, and then modify any other optional properties as needed.
On the Security tab, click Add, type the name of the users you want to issue the key recovery agent certificates to, and then click OK. Under Group or user names, select the user names that you just added. Under Permissions, select the Read and Enroll check boxes, and then click OK.

QUESTION 328
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. All servers run Windows Server 2012 R2.
You install the IP Address Management (IPAM) Server feature on Server1.
From the Provision IPAM wizard, you select the Group Policy Based provisioning method and enter a GPO name prefix of IPAM1.
You need to provision IPAM by using Group Policy.
What command should you run on Server1 to complete the process?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 329
You have a server named DNS1 that runs Windows Server 2012 R2.
You discover that the DNS resolution is slow when users try to access the company intranet home page by using the URL http://companyhome.
You need to provide single-label name resolution for CompanyHome that is not dependent on the suffix search order.
Which three cmdlets should you run? (Each correct answer presents part of the solution.
Choose three.)

A.    Add-DnsServerPrimaryZone
B.    Add-DnsServerResourceRecordCName
C.    Set-DnsServerDsSetting
D.    Set-DnsServerGlobalNameZone
E.    Set-DnsServerEDns
F.    Add-DnsServerDirectory Partition

Answer: ABD
Explanation:
*The Add-DnsServerPrimaryZone cmdlet adds a specified primary zone on a Domain Name System (DNS) server.
* The Add-DnsServerResourceRecordCName cmdlet adds a canonical name (CNAME) resource record to a specified Domain Name System (DNS) zone. A CNAME record allows you to use more than one resource record to refer to a single host *The Set-DnsServerGlobalNameZone cmdlet enables or disables single-label Domain Name System (DNS) queries.
It also changes configuration settings for a GlobalNames zone.
The GlobalNames zone supports short, easy-to-use names instead of fully qualified domain names (FQDNs) without using Windows Internet Name Service (WINS) technology. For instance, DNS can query SarahJonesDesktop instead of SarahJonesDesktop.contoso.com.

QUESTION 330
Your network contains three servers named HV1, HV2, and Server1 that run Windows Server 2012 R2. HV1 and HV2 have the Hyper-V server role installed. Server1 is a file server that contains 3 TB of free disk space.
HV1 hosts a virtual machine named VM1. The virtual machine configuration file for VM1 is stored in D:\VM and the virtual hard disk file is stored in E:\VHD.
You plan to replace drive E with a larger volume.
You need to ensure that VM1 remains available from HV1 while drive E is being replaced. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?

A.    Perform a live migration to HV2.
B.    Add HV1 and HV2 as nodes in a failover cluster. Perform a storage migration to HV2.
C.    Add HV1 and HV2 as nodes in a failover cluster. Perform a live migration to HV2.
D.    Perform a storage migration to Server1.

Answer: D

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html

QUESTION 311
You have five servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.
 
Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles.
Dynamic quorum management is disabled.
You plan to perform hardware maintenance on Server3.
You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Servers, the cluster resource will remain available in Site1.
What should you do?

A.    Add a file share witness in Site1.
B.    Enable DrainOnShutdown on Cluster1.
C.    Remove the node vote for Server4 and Servers.
D.    Remove the node vote for Server3.

Answer: C

QUESTION 312
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. Server1 is configured to resolve single-label names for DNS clients.
You need to view the number of queries for single-label names that are resolved by Server1.
What command should you run?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 313
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
A technician performs maintenance on Server1.
After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1.
You open the Services console as shown in the exhibit. (Click the Exhibit button.)
 
You need to ensure that you can connect to the IPAM server.
Which service should you start?

A.    Windows Process Activation Service
B.    windows Event Collector
C.    Windows Internal Database
D.    Windows Store Service (WSService)

Answer: C

QUESTION 314
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
You have a Dynamic Access Control policy named Policy1.
You create a new Central Access Rule named Rule1.
You need to add Rule1 to Policy1.
What command should you run?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 315
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a server named Server1. Both servers run Windows Server 2012 R2.
You configure the classification of a share on Server1 as shown in the Share1 Properties exhibit. (Click the Exhibit button.)
You configure the resource properties in Active Directory as shown in the Resource Properties exhibit. (Click the Exhibit button.)
 
You need to ensure that the Impact classification can be assigned to Share1 immediately.
Which cmdlet should you run on each server?
To answer, select the appropriate cmdlet for each server in the answer area.
 
Answer:
 

QUESTION 316
Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and childl.contoso.com. The domains contain three domain controllers. The domain controllers are configured as shown in the following table.
 
You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring setting is enforced in both domains.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    Raise the domain functional level of contoso.com.
B.    Raise the domain functional level ofchildl.contoso.com.
C.    Raise the forest functional level of contoso.com.
D.    Upgrade DC11 to Windows Server 2012 R2.
E.    Upgrade DC1 to Windows Server 2012 R2.

Answer: AE
Explanation:
The root domain in the forest must be at Windows Server 2012 level. First upgrade DC1 to this level, then raise the contoso.com domain functional level to Windows Server 2012.

QUESTION 317
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed. Server1 has an IPv6 scope named Scope1.
You implement an additional DHCP server named Server2 that runs Windows Server 2012 R2.
You need to provide high availability for Scope1. The solution must minimize administrative effort.
What should you do?

A.    Install and configure Network Load Balancing (NLB) on Server1 and Server2.
B.    Create a scope on Server2.
C.    Configure DHCP failover on Server1.
D.    Install and configure Failover Clustering on Server1 and Server2.

Answer: B

QUESTION 318
Your company has two offices. The offices are located in Seattle and Montreal.
The network contains an Active Directory domain named contoso.com. The domain contains two DHCP servers named Server1 and Server2. Server1 is located in the Seattle office. Server2 is located in the Montreal office. All servers run Windows Server 2012 R2.
You need to create a DHCP scope for video conferencing in the Montreal office. The scope must be configured as shown in the following table.
 
Which Windows PowerShell cmdlet should you run?

A.    Add-DchpServerv4SuperScope
B.    Add-DchpServerv4MulticastScope
C.    Add-DHCPServerv4Policy
D.    Add-DchpServerv4Scope

Answer: B

QUESTION 319
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server3 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
DHCP is configured as shown in the exhibit. (Click the Exhibit button.)
 
Scope1, Scope2, and Scope3 are configured to assign the IP addresses of two DNS servers to DHCP clients. The remaining scopes are NOT configured to assign IP addresses of DNS servers to DHCP clients.
You need to ensure that only Scope1, Scope3, and Scopes assign the IP addresses of the DNS servers to the DHCP clients. The solution must minimize administrative effort.
What should you do?

A.    Create a superscope and a filter.
B.    Create a superscope and scope-level policies.
C.    Configure the Server Options.
D.    Configure the Scope Options.

Answer: C

QUESTION 320
You have an Active Directory Rights Management Services (AD RMS) cluster.
You need to prevent users from encrypting new content. The solution must ensure that the users can continue to decrypt content that was encrypted already.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    From the Active Directory Rights Management Services console, enable decommissioning.
B.    From the Active Directory Rights Management Services console, create a user exclusion policy.
C.    Modify the NTFS permissions of %systemdrive%\inetpub\wwwroot\_wmcs\licensing.
D.    Modify the NTFS permissions of
%systemdrive%\inetpub\wwwroot\_wmcs\decommission.
E.    From the Active Directory Rights Management Services console, modify the rights policy templates.

Answer: BE

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html

QUESTION 291
Hotspot Question
Your network contains two Web servers named Server1 and Server2. Both servers run Windows Server 2012 R2.
Server1 and 5erver2 are nodes in a Network Load Balancing (NLB) cluster. The NLB cluster contains an application named App1 that is accessed by using the URL http://app1.contoso.com.
You deploy a new server named Server3 that runs Windows Server 2012 R2. The contoso.com DNS zone contains the records shown in the following table.
 
You need to add Server3 to the NLB cluster.
What command should you run?
To answer, select the appropriate options in the answer area.
 
Answer:
 

QUESTION 292
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server 2012 R2.
Server1 and Server3 are located in a site named Site1. Server2 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1.
Dynamic quorum management is disabled.
Cluster1 is configured to use the Node Majority quorum configuration.
You need to ensure that users in Site2 can access Cluster1 if the network connection between the two sites becomes unavailable.
What should you run from Windows PowerShell?
To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
 
Answer:
 

QUESTION 293
Hotspot Question
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
The network has the physical sites and TCP/IP subnets configured as shown in the following table.
 
You have a web application named App1 that is hosted on six separate Web servers. DNS has the host names and IP addresses registered as shown in the following table.
 
You discover that when users connect to appl.contoso.com, they are connected frequently to a server that is not on their local subnet.
You need to ensure that when the users connect to appl.contoso.com, they connect to a server on their local subnet. The connections must be distributed across the servers that host appl.contoso.com on their subnet.
Which two settings should you configure?
To answer, select the appropriate two settings in the answer area.
 
Answer:
 

QUESTION 294
You have a server named Server1.
You install the IP Address Management (IPAM) Server feature on Server1.
You need to provide a user named User1 with the ability to set the access scope of all the DHCP servers that are managed by IPAM. The solution must use the principle of least privilege.
Which user role should you assign to User1?

A.    IPAM Administrator Role
B.    IPAM DHCP Administrator Role
C.    IPAM ASM Administrator Role
D.    DNS Record Administrator Role

Answer: C
Explanation:
IPAM ASM Administrators
IPAM ASM Administrators is a local security group on an IPAM server that is created when you install the IPAM feature. Members of this group have all the privileges of the IPAM Users security group, and can perform IP address space tasks in addition to IPAM common management tasks.
Note: When you install IPAM Server, the following local role-based IPAM security groups are created:
IPAM Users
IPAM MSM Administrators
IPAM ASM Administrators
IPAM IP Audit Administrators
IPAM Administrators
Incorrect:
not A: Too much privileges.
IPAM Administrators
IPAM Administrators is a local security group on an IPAM server that is created when you install the IPAM feature. Members of this group have privileges to view all IPAM data and perform all IPAM tasks.

QUESTION 295
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2.
You install the DHCP Server server role on Server1 and Server2. You install the IP Address Management (IPAM) Server feature on Server1.
You notice that you cannot discover Server1 or Server2 in IPAM.
You need to ensure that you can use IPAM to discover the DHCP infrastructure.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    On Server2, create an IPv4 scope.
B.    On Server1, run the Add-IpamServerInventory cmdlet.
C.    On Server2, run the Add-DhcpServerInDc cmdlet
D.    On both Server1 and Server2, run the Add-DhcpServerv4Policy cmdlet.
E.    On Server1, uninstall the DHCP Server server role.

Answer: BC
Explanation:
The Add-IpamServerInventory cmdlet adds a new infrastructure server to the IP Address Management (IPAM) server inventory. Use the fully qualified domain name (FQDN) of the server to add to the server inventory.
The Add-DhcpServerInDC cmdlet adds the computer running the DHCP server service to the list of authorized Dynamic Host Configuration Protocol (DHCP) server services in the Active Directory (AD). A DHCP server service running on a domain joined computer needs to be authorized in AD so that it can start leasing IP addresses on the network.

QUESTION 296
Your network contains two Active Directory forests named contoso.com and corp.contoso.com.
 
User1 is a member of the DnsAdmins domain local group in contoso.com.
User1 attempts to create a conditional forwarder to corp.contoso.com but receive an error message shown in the exhibit. (Click the Exhibit button.)
 
You need to configure bi-directional name resolution between the two forests.
What should you do first?

A.    Add User1 to the DnsUpdateProxy group.
B.    Configure the zone to be Active Directory-integrated.
C.    Enable the Advanced view from DNS Manager.
D.    Run the New Delegation Wizard.

Answer: A

QUESTION 297
Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains one domain. Contoso.com has a two-way forest trust to adatum.com. Selective authentication is enabled on the forest trust.
Contoso contains 10 servers that have the File Server role service installed. Users successfully access shared folders on the file servers by using permissions granted to the Authenticated Users group.
You migrate the file servers to adatum.com.
Contoso users report that after the migration, they are unable to access shared folders on the file servers.
You need to ensure that the Contoso users can access the shared folders on the file servers.
What should you do?

A.    Disable selective authentication on the existing forest trust.
B.    Disable SID filtering on the existing forest trust.
C.    Run netdom and specify the /quarantine attribute.
D.    Replace the existing forest trust with an external trust.

Answer: A

QUESTION 298
You have a server named FS1 that runs Windows Server 2012 R2.
You install the File and Storage Services server role on FS1.
From Windows Explorer, you view the properties of a shared folder named Share1 and you discover that the Classification tab is missing.
You need to ensure that you can assign classifications to Share1 from Windows Explorer manually.
What should you do?

A.    From Folder Options, select Show hidden files, folders, and drives.
B.    From Folder Options, clear Use Sharing Wizard (Recommend).
C.    Install the File Server Resource Manager role service.
D.    Install the Enhanced Storage feature.

Answer: C

QUESTION 299
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
 
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically. What should you do on Server1?

A.    Configure the Discovery settings of the iSCSI initiator.
B.    Configure the security settings of the iSCSI target.
C.    Run the Set-Wmilnstance cmdlet.
D.    Run the Set-IscsiServerTarget cmdlet.

Answer: C

QUESTION 300
Hotspot Question
You have a file server named Server1 that runs Windows Server 2012 R2.
Server1 contains a file share that must be accessed by only a limited number of users.
You need to ensure that if an unauthorized user attempts to access the file share, a custom access-denied message appears, which contains a link to request access to the share. The message must not appear when the unauthorized user attempts to access other shares.
Which two nodes should you configure in File Server Resource Manager?
To answer, select the appropriate two nodes in the answer area.
 
Answer:
 

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html

QUESTION 281
Your network contains an Active Directory forest named contoso.com.
Users frequently access the website of an external partner company. The URL of the website is http://partners.adatum.com.
The partner company informs you that it will perform maintenance on its Web server and that the IP addresses of the Web server will change.
After the change is complete, the users on your internal network report that they fail to access the website. However, some users who work from home report that they can access the website.
You need to ensure that your DNS servers can resolve partners.adatum.com to the correct IP address immediately.
What should you do?

A.    Run dnscmd and specify the CacheLockingPercent parameter.
B.    Run Set-DnsServerGlobalQueryBlockList.
C.    Run ipconfig and specify the Renew parameter.
D.    Run Set-DnsServerCache.

Answer: A
Explanation:
* To configure cache locking using a command line Open an elevated command prompt.
Type the following command, and then press ENTER:
dnscmd /Config /CacheLockingPercent <percent>
Restart the DNS Server service.
* Parameter <percent>
Optional.Specifies the cache locking percent, from 0 to 100 in decimal format. If no value is entered, the cache locking percent is set to 0.

QUESTION 282
You have a server named Server1.
You install the IP Address Management (IPAM) Server feature on Server1.
You need to provide a user named User1 with the ability to set the access scope of all the DHCP servers that are managed by IPAM. The solution must use the principle of least privilege.
Which user role should you assign to User1?

A.    DNS Record Administrator Role
B.    IPAM DHCP Reservations Administrator Role
C.    IPAM Administrator Role
D.    IPAM DHCP Administrator Role

Answer: C
Explanation:
When you install IPAM Server, the following local role-based IPAM security groups are created:
IPAM Users
IPAM MSM Administrators
IPAM ASM Administrators
IPAM IP Audit Administrators
IPAM Administrators

QUESTION 283
You have a virtual machine named VM1 that runs on a host named Host1.
You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.
You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?

A.    From VM1 on Host2, click Extend Replication.
B.    On Host1, configure the Hyper-V settings.
C.    From VM1 on Host1, click Extend Replication.
D.    On Host2, configure the Hyper-V settings.

Answer: A

QUESTION 284
Hotspot Question
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that you can use the NFS Share – Advanced option from the New Share Wizard in Server Manager.
Which two role services should you install?
To answer, select the appropriate two role services in the answer area.
 
Answer:
 

QUESTION 285
Your network contains 20 iSCSI storage appliances that will provide storage for 50 Hyper-V hosts running Windows Server 2012 R2.
You need to configure the storage for the Hyper-V hosts. The solution must minimize administrative effort.
What should you do first?

A.    Install the iSCSI Target Server role service and configure iSCSI targets.
B.    Install the iSNS Server service feature and create a Discovery Domain.
C.    Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties.
D.    Install the Multipath I/O (MPIO) feature and configure the MPIO Properties.

Answer: C

QUESTION 286
Drag and Drop Question
You have a server that runs Windows Server 2012 R2.
You create a new work folder named Share1.
You need to configure Share1 to meet the following requirements:
Ensure that all synchronized copies of Share1 are encrypted. Ensure that clients synchronize to Share1 every 30 minutes. Ensure that Share1 inherits the NTFS permissions of the parent folder.
Which cmdlet should you use to achieve each requirement?
To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
 
Answer:
 

QUESTION 287
You create a new virtual disk in a storage pool by using the New Virtual Disk Wizard. You discover that the new virtual disk has a write-back cache of 1 GB.
You need to ensure that the virtual disk has a write-back cache of 5 GB.
What should you do?

A.    Detach the virtual disk, and then run the Resize-VirtualDisk cmdlet.
B.    Detach the virtual disk, and then run the Set-VirtualDisk cmdlet.
C.    Delete the virtual disk, and then run the New-StorageSubSystemVirtualDisk cmdlet.
D.    Delete the virtual disk, and then run the New-VirtualDisk cmdlet.

Answer: D

QUESTION 288
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:
 
You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
 
Answer:
 

QUESTION 289
Your network contains an Active Directory domain named contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Active Directory Federation Services server role installed. Server2 is a file server.
Your company introduces a Bring Your Own Device (BYOD) policy.
You need to ensure that users can use a personal device to access domain resources by using Single Sign-On (SSO) while they are connected to the internal network.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)

A.    Enable the Device Registration Service in Active Directory.
B.    Publish the Device Registration Service by using a Web Application Proxy.
C.    Configure Active Directory Federation Services (AD FS) for the Device Registration Service.
D.    Create and configure a sync share on Server2.
E.    Install the Work Folders role service on Server2.

Answer: AC

QUESTION 290
Drag and Drop Question
You have two failover clusters named Cluster1 and Cluster2. All of the nodes in both of the clusters run Windows Server 2012 R2.
Cluster1 hosts two virtual machines named VM1 and VM2.
You plan to configure VM1 and VM2 as nodes in a new failover cluster named Cluster3.
You need to configure the witness disk for Cluster3 to be hosted on Cluster2.
Which three actions should you perform in sequence?
To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.
 
Answer:
 

Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-412 Dump: http://www.braindump2go.com/70-412.html